Poolbiking ONE 2.0 Notice D'utilisation page 8

The user's maximum weight must not exceed 264 lb.
3. GENERAL ASSEMBLY INSTRUCTIONS
INITIAL ASSEMBLING:
The crank arms being mounted in their respective pedals are delivered loose.
For easy mounting, an Allen wrench no. 5 and a thread locking adhesive are enclosed.
Prior to mounting, apply TWO drops of thread locking to the thread of each bolt and
fit the crank arm-pedal onto the axle and tightly secure with the Allen wrench with
the hand.
Leave the POOLBIKING parts to dry for two hours and then the machine is ready for normal
use. It is advisable after a couple of rides to retighten the bolts with force in order to have a
proper assembly between crank and axle.
IMPORTANT:
The thread sealant is a product that seals two screw threads to avoid loosening
when bikes are used. This product is for one single use only and cannot be reused.
In case you need to re-tighten a screw, you must remove all existing sealant from
the screws and put new sealant. In the market there are three types of sealant:
mild, medium and strong, we suggest only using medium or strong sealant.
4. TECHNICAL DATA SHEET
The material we used in all our components is an industrial high-quality Stainless Steel AISI
316L. It is regularly used at aerospace industry, chemical and aeronautical ones too. We
improve material protection adding an electrochemical procedure that gives the stainless steel a
bright appearance. We don't apply a mechanical polished in order to avoid any contamination.
It means that is possible you will see little rubbings or marks coming from the material. We
don't use bright decorative stainless steel, better for aesthetics products but with less corrosion
resistance.
MATERIALS: The complete bike is manufactured from stainless steel AISI 316L and electro
polished for protection and passivation.
PEDALS:
Built in techno polymer for medical, antiallergic and antibacterial use. Soft base for
user comfort.
SUPPORTS: all supports are made of special grid rubber.
SADDLE: Exclusive model for water use. Rails in stainless 316 Ti.
BEARING SYSTEM: stainless 55 mm races. Maximum protection tightness seals.
WEIGHT POOLBIKING: 19kg/20kg
www.poolbiking.com
Sealing aplication
area (10mm)
– www.poolbiking.us – www.poolbiking.fr
ONE 2.0/ONE PLUS
VERACRUZ/EVOLUTION
TENERIFE/IBIZA
ESPAÑOL /ENGLISH /FRANÇAIS