Telescopepaddle
Guide the bar with the handle into the opening of the middle
bar. The middle bar is inserted into the lower bar with the
paddle and fixed with a pin on the front side. The middle rod
allows the telescopepaddle to be adjusted in size. Simply
open the clip and pull out the desired length. We recommend
setting the paddle between 20 and 40 cm larger than your
height to ensure optimal use. When the desired length is
reached close the clip.
Release air
• Remove all accessories e.g. the fin
• Make sure that the SUP is free of dirt. (If necessary, clean
it first).
• Open the twist lock.
• Push the valve to the side and the air starts to escape. To
ensure that all air escapes,
you can fold the board and/or sit on certain places.
• When all air has been released, close the twist lock.
Storage
Remove all accessories before folding.
Fold the SUP from the nose down so it is as flat as possible.
The SUP must be completely dry and clean and must not
contain any air. It is recommended to store the SUP and its
accessories in the backpack included in the delivery. Store
the SUP in a clean and dry place. Do not expose it to high or
low temperatures during storage.
Repair and Maintenance
A repair kit is included with patches and a valve attachment
tool.
The patches can be used to repair minor damage. Use a
suitable strong adhesive.
If the SUP loses air through the valve, you can use the
tool to retighten it. Turn
clockwise to tighten the SUP.
In case water got into the SUP, you can remove the valve
completely with the tool and thus drain the water.
Technical data
Recommended pressure: 12-15 PSI, Productsize:
305 x 76 x 15 cm, Weight board: 8 kg, Material: DWF, PVC,
EVA
Box contents
Stand up paddle board, telescopepaddle, 1x fin , backpack,
air pump, safety leash, repair kit, user manual
Guarantee and service conditions
Due to the fast advancement of these products, no guarantee of completeness can be
given. Modifcations in technique and confguration are subject to change at any time. To
receive a digital copy of this user manual, please contact our service department.
You receive a voluntary 2- year manufacturer guarantee, starting at purchase date, for
material and production defects of the product. This guarantee is applicable in Ger-
many, Austria and Switzerland. The receipt counts as a proof of guarantee. Within the
guarantee period we will repair all material and manufacturer defects free of charge.
Your statutory warranties remains unaffected by this guarantee.
The guarantee does not count:
•
in case of damages which have arisen after improper use,
•
for wear parts / accessories that are subject to natural wear and tear,
•
for defects that are known to the customer at purchase,
•
in case of damages that occurred due to repair or intervention of the buyer or an
unauthorized third party,
•
in case the device was connected to a higher voltage as stated on the device
when dropping the device or single elements of it,
•
for improper transportation or packaging damages that occurred due to force
majeure,
•
for non -observance of valid safety precautions,
•
for non -observance of the manual.
In case of a guarantee claim, the date of sale has to be proven by receipt or invoice.
Replacements for reasons covered by the guarantee do not lead to an extension of the
original guarantee period, neither for the device itself nor for any replaced compo-
nents. If you are claiming a valid guarantee, we are entitled to choose whether we will
repair the device free of charge or exchange it for a new device. Any further claims are
excluded. Parts replaced will pass into our property. We reserve the right to change
defective parts or products against follow -up models.
Please always contact us before you return your product. Provided that a return
shipment has been agreed upon, send the defective product securely packaged at your
own cost to our service department. It is absolutely necessary that you add a copy of
your receipt to your return shipment. Repairs carried out after the guarantee period
are subject to a charge. We will not accept freight collect shipments and will return
them to the sender.
Service Adresse
Lived non food GmbH
Friedrich-Seele-Straße 20
D-38122 Braunschweig
service@x4-life.de
7