Realme Buds Air2 Neo Mode D'emploi page 9

Charging of charging box
Please use the Type-C cable provided with the product for charging. If the
indicator lamp is on after the cable is inserted, it indicates that the charging box
has entered the charging state.
* The indicator lamp flashes during charging and is normally on after the product has been fully
charged.
Touch functions
1. Touch twice:
Play/pause music;
Answer/hang up.
2. Touch three times:
Next Song.
3. Press and hold for 2s:
Reject incoming call.
4. Press and hold both left and right earbuds for 2s:
Switch between the noise cancelling mode and transparency mode.
Restore factory settings
Keep the earbuds in the charging box, press and hold the multifunction key for 10s
until the indicator lamp flashes in red and green alternately, and the factory setting
will be restored.
INSTRUCTIONS FOR USE
The indicator lamp is red – the battery level is
below 20%
The indicator lamp is green – the battery level is
higher than 20%
9