Publicité
Les langues disponibles
Les langues disponibles
To push inside the rotation button then rotate the
machine handle. Fig. 12
There have 3 position between handle and housing.
When you chosen the position what you want, then
release the rotation button.
7. Cleaning, maintenance and ordering of
spare parts
7.1 Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the device imme-
diately each time you have finished11 using it.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
• A few drops of oil (e.g. sewing machine oil) will
improve the cutting performance of the blades,
but never apply any grease to the blades.
• To ensure constant exact cutting it is also
important to remove grass remnants and dirt
from between the upper and lower blade.
Important!
Never clean the tool under running water - and
particularly never with high pressure - because
of the potential danger to persons and proper-
ty. Keep your cordless grass cutter and hedge
trimmer in a dry and frost proof place. Choose a
place that children are unable to enter.
7.2 Maintenance
• To achieve good results you should keep the
blades sharp at all times. In particular we re-
commend that you immediately level off any jags
or ridges caused by stones or the like. The tool
should be thoroughly cleaned both before and
after use.
• There are no parts inside the equipment which
require additional maintenance.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
• Type of machine
• Article number of the machine
• Identification number of the machine
8. Disposal and recycling
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as special
waste. Ask your dealer or your local council.
25609_GB_Heckenschere mit langem Griff.indd 21
For EU countries only
Never place any electric power tools in your house-
hold refuse.
To comply with European Directive 2002/96/EC
concerning old electric and electronic 12 equip-
ment and its implementation in national laws, old
electric power tools have to be separated from
other waste and disposed of in an environment-fri-
endly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return re-
quest:
As an alternative to returning the equipment to the
manufacturer, the owner of the electrical equip-
ment must make sure that the equipment is proper-
ly disposed of if he no longer wants to keep the
equipment. The old equipment can be returned to
a suitable collection point that will dispose of the
equipment in accordance with the national recy-
cling and waste disposal regulations. This does not
apply to any accessories or aids without electrical
components supplied with the old equipment.
GB
21
20.03.18 19:19
Publicité
