Operation - Baby Trend HC01 Serie Manuel D'instruction

OPERATION

TO ATTACH AND OPERATE TRAY
WARNING:
Always
check that the high chair is
locked in the open position
before using.
WARNING:
The tray is
not designed to hold the child
in the chair. The child must be
secured by the safety harness at
all times while in the high chair.
TO ATTACH TRAY
15) • To attach the Tray, line up the grooves
on the bottom of the tray with the
armrests of the high chair. Squeeze the
Tray's release handle and slide the tray
onto the armrests (Fig. 15a). The Tray
has a 3-position adjustment. To adjust
the position, squeeze the Tray's release
handle located underneath the tray and
reposition the tray to the desired position
(Fig. 15b). Release the Tray's handle.
Check that the Tray is securely locked in
its new position.
9
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Tray Release located underneath tray
Fig. 15a
3-position
Fig. 15b
TO ATTACH INSERT TRAY
16) • The dishwasher safe food Tray Insert
snaps onto the High Chair Tray and is
held in place by tabs on the sides of the
Tray. When installing the Tray Insert
make sure that its snaps into place to
prevent the child from removing the Tray
Insert. To remove Insert unsnaps tabs
from the Tray.
• The Tray may be stored on the back legs
of the High Chair. Align the holes in the
rear of the tray with the small pegs on
the back legs (Fig. 16).
TO USE SAFETY BELT
WARNING:
It is
recommended that only
children capable of sitting
upright unassisted use the high
chair in the upright position.
WARNING:
Prevent
serious injury or death from falls
or sliding out. Always secure
child in the restraint system,
either in the reclining, semi-
reclining or upright position.
The Tray is not designed to hold the child in
the chair. Always keep child in view while in
high chair.
NEVER leave child unattended.
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Fig. 16
10