RIUKOE Mini Gobo Moving head Light Mode D'emploi page 3

DMX512 Channel Control Function Instructions
Channel
Value
9CH 11CH
CH1 CH1 000~255 Control light horizontal rotation (X axis)
CH2 000~255 Fine-tune the light horizontal rotation (X-axis fine-tuning)
CH2 CH3 000~255 Control the vertical rotation of light (Y axis)
CH4 000~255 Fine-tune the light vertical rotation (Y-axis fine-tuning)
000~127 Control light color selection
Control light color wheel rotation speed, rotation speed changes from
128~189
fast to slow
CH3 CH5
190~193 Color wheel stops turning
Control light color wheel rotation, rotation speed from slow to fast
194~255
change
000~063 Control Gobo selection
064~127 Control Gobo jitter selection
Control light Gobo wheel rotation speed, rotation speed changes from
128~189
CH4 CH6 fast to slow
190~193 Gobo wheel stops rotating
Control light Gobo wheel rotation speed, rotation speed from slow to
194~255
fast change
000~007 Control light is off, the light is off
008~015 Turn on the light
016~131 Control the light strobe speed, strobe speed changes from slow to fast
132~139 Turn on the light
140~181 Control light quickly closed, slowly open
CH5 CH7
182~189 Turn on the light
190~231 The control light turns on quickly , turns off slowly.
232~239 Turn on the light
240~247 Control light random stroboscopic .
248~255 Turn on the light
CH6 CH8 000~255 Adjust the fixture brightness: 0 ~ 100%
CH9 000~255 Control X-axis / Y-axis rotation speed, rotation speed changes from fast
CH7
to slow
Function
000~069 No Function
070~079 The light shut off when the X / Y axis is rotated
080~089 No Function
090~099 Lights turn off when the color wheel is turned
100~109 No Function
CH8 CH10
110~119 The light shut off when the gobo is turned
120~199 No Function
200~209 Reset
210~249 No Function
250~255 Voice control function
000~020 Standard lighting effects
021~040 Stage lighting effects
041~060 TV lighting effects
CH9 CH11
061~080 Architectural lighting effects
081~100 Theater lighting effects
101~255 Default standard lamp effect
Troubleshooting
When the following problems occur on the device, follow the prompts to troubleshoot the problem:
1. The fixture is off or the fixture is not working: Check if the power switch, power cable, etc. are intact, plug
and socket are plugged together, and check if the device settings and input voltage are correct.
2. In master-slave mode, lamps do not work or are not responding or are not synchronized. Please check
the following tips:
A. Confirm whether the connected device has only one host, the host display shows "Sh 0", and the rest for
the slave, the display shows "SL 1" or "SL 2", otherwise the slave should be set to the unified mode.
B. Confirm whether the channel settings of all slaves are unified (CH9 or CH11).
C. Confirm that all fixtures horizontal rotation is set to the "on" state of "Pan" and whether the vertical
rotation is set to the "on" state of "tit".
D. Check the signal cable is intact.
E. Turn off the power 3-5 seconds, then restart the power.
3. In the DMX512 mode, the fixture does not work or no response or not synchronized, please check the
following tips:
A. Confirm that all devices are set in the unified channel control mode (CH9 or CH11).
B. Check if the equipment has received the DMX512 signal (when receiving 512 signals, the display shows