Publicité
Les langues disponibles
Les langues disponibles
(GB) Fitting instructions LED flood light rt. No.: 20197
Techn. data:
72 W (24x3 W), 2.5
at 12 V, 5
light in aluminium housing, 60° light scattering
angle, 10–30 V direct current, IP65, light colour 6000
K, lumen approx. 4600, total height approx. 11.5 cm,
housing height approx. 8 cm, total width incl. bra-
cket 40,5 cm, 2 LED rows.
Caution: Please read these fitting instructions carefully.
Check carefully that the following general safety instructions are adhered to before this LED
flood light is used.
Non-adherence can lead to damage to the appliance and to injuries.
1. General safety instructions
1. The LED flood light may only be fitted by specially trained persons with good knowledge of the safety regulations.
Not for use in road traffic.
2. The appliance must be fitted out of reach of children.
2. Installation/Operation
1. Unpack the LED flood light and take all parts out of the packaging.
2. Now screw the feet to the side of the light housing, using the included Allen screws. The smaller Allen screw is for
fixing the lamp housing to the feet.
3. Now screw the flood light to the fitting area, using the included screws and nuts. Place the rubber caps under the
feet for protection.
4. Please have a professional connect the flood light (red = +, black = –).
The power source must be at least 10 V to a max. of 30 V direct current.
3. Warranty
We offer a warranty period of 24 months with this product according to the usual legal regulations, commencing
from the date of purchase by the end user.
This warranty covers all manufacturing defects, but does not cover the following details: Faults and deficiencies re-
sulting from normal wear, on wear parts, etc.; damage or deficiencies resulting from not intended use, accident or
modification.
We reserve the right to refuse a warranty claim, if proof of purchase cannot be provided; the product has not been
serviced correctly or at all (measures not taken or insufficient measures for cleaning and servicing).
Please keep the receipt, as this acts as proof of purchase date.
In case of a warranty claim, the appliance must be returned to the manufacturer fully fitted, cleaned (if possible in
the original packaging), together with the proof of purchase.
Copyright by
All rights reserved. It is not permitted without written approval from Berger + Schröter to reproduce these operating instructions. It is
also not permitted to reproduce extracts in any form that have been created or processed by use of electronic, mechanical or chemical
procedures. Technical changes can be made at any time without prior announcement. The operating instructions are corrected regu-
larly. We assume no liability for technical and typographical errors and their results.
at 24 V, LED flood
2
Scope of delivery:
2 x llen key 2.5 + 5 mm
2 x llen screws M3, length 17 mm
2 x llen screws M6, length 23 mm
2 x llen screws M6, length 30 mm
2 x nuts M6
2 x rubber caps
www.berger-schroeter.de
Publicité
