Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1. Begin LEG assembly by attaching LEG BASE #11 and LEG TOP #12 to one LEG SIDE #10 with
1-3/4" SCREW #8. Attach one LEG PANEL #9 with 3/4" SCREW #7. Attach remaining LEG SIDE
#10 with 1-3/4" SCREW #8. Attach remaining LEG PANEL #9 with 3/4" SCREW #7. Repeat
assembly for remaining LEG.
2. Attach each assembled LEG to the bottom of the TABLE BODY#5 with BOLT #2, NUT #4 and
FLAT WASHER #3.
3. Thread two LEG LEVELERS #1 into the bottom of each LEG.
5
Publicité
