Télécharger Imprimer la page
Masquer les pouces Voir aussi pour 374UT:

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

MINI UNIVERSAL REMOTE CONTROL
MODEL 374UT
WARNING: This product can expose you to chemicals
including lead, which are known to the State of
California to cause cancer or birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
The Mini Universal Remote Control can be programmed to
activate up to two products, such as a garage door opener, MyQ
light controls, gate operator, or commercial door operator. Each
button on the remote control works independently of the other
and must be programmed separately. The images throughout
this manual are for reference only and your product may look
different.
The Mini Universal Remote Control can be programmed to
operate with different brands of garage door openers. It is
compatible with most garage door opener systems
manufactured by Chamberlain
Xtreme Garage
Linear
, Stanley
®
Matic
, Do-It
®
NOTE: The Mini Universal Remote Control is NOT compatible
with DIP switch remote controls or receivers.
, Sommer
®
, Overhead Door
®
, Master Mechanic
®
, LiftMaster
®
, Ryobi
, Garage Master
®
®
, Wayne Dalton
®
, Raynor
®
, Sears Craftsman
®
, Genie
®
, Moore-O-
®
, and True Value
®
®
,
®
,
®
.
®

Publicité

loading

Sommaire des Matières pour LiftMaster 374UT

  • Page 1 MINI UNIVERSAL REMOTE CONTROL MODEL 374UT WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • Page 2 , Raynor , True Value , Xtreme Garage ® ® ® ® ®, ® Sommer , and Ryobi are compatible with LiftMaster technology. ® ® ® ** For Genie Intellicode II programming, go to www.LiftMaster.com/374ut to download the full manual.
  • Page 3 Ensure door or gate is clear of ALL obstructions. NOTE: If the Mini Universal Remote Control is being programmed to a Genie Garage Door Opener, visit LiftMaster.com for programming instructions. The Mini Universal Remote Control comes preset to work with LiftMaster Security+ 2.0 operators.
  • Page 4 Press the LEARN button twice. PROGRAM/LEARN BUTTON PROGRAM/LEARN BUTTON LEARN CONTROL BOARD XMITTER LEARN NOTE: Visit LiftMaster.com/374ut to program the Mini Universal CONTROL BOARD XMITTER Remote Control to a commercial door operator. RADIO BUTTON LOGIC BOARD RADIO BUTTON LOGIC BOARD...
  • Page 5 Test the remote control by pressing the button you programmed in step 4. If the garage door opener does not activate, repeat the programming steps or visit LiftMaster.com/374ut for additional instructions. NOTICE: To comply with FCC and/or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery.
  • Page 6 • DO NOT recharge, disassemble, heat above 212°F (100°C) or incinerate. Dispose of batteries properly. Replace ONLY with 3V CR2032 coin batteries. Screw Battery LiftMaster.com All trade names used herein are trademarks of respective manufacturers listed. © 2022, Chamberlain Group LLC All Rights Reserved 114A4846E...
  • Page 7 MINI-TÉLÉCOMMANDE UNIVERSELLE MODÈLE 374UT AVERTISSEMENT : Ce produit peut vous exposer à des produits chimiques comme le plomb, reconnu par l’État de la Californie comme cause de cancers, d’anomalies congénitales et d’autres problèmes liés à la reproduction. Pour plus d’informations, visitez www.P65Warnings.ca.gov...
  • Page 8 ® ® , ® ® ® ® Garage , Ryobi , et True Value sont compatibles avec la technologie LiftMaster ® ® ® ® ** Pour la programmation Genie Intellicode II, aller à www.LiftMaster.com/374ut pour ® télécharger le manuel complet.
  • Page 9 TOUTE obstruction. REMARQUE : Si la télécommande universelle Mini est programmée pour un Genie Garage ouvre-porte, visite LiftMaster.com pour les instructions de programmation. Le Mini Remote Control Universal est préréglé à travailler avec LiftMaster Security+ 2.0 opérateurs. Pour les actionneurs ®...
  • Page 10 LEARN BOUTON DE PROGRAMMATION/ (apprentissage). D’APPRENTISSAGE BOUTON DE PROGRAMMATION/ D’APPRENTISSAGE LEARN CARTE DE CONTRÔLE XMITTER REMARQUE : Visitez LiftMaster.com/374ut de programmer la LEARN télécommande universelle Mini à un opérateur de porte CARTE DE CONTRÔLE XMITTER commerciale. BOUTON RADIO CARTE LOGIQUE...
  • Page 11 Tester la télécommande en appuyant sur le bouton programmé à l’étape 4. Si l’ouvre-porte de garage ne s’active pas, répéter les étapes de programmation ou allez à LiftMaster.com/374ut pour des instructions supplémentaires. AVIS : Les règles de la FCC et/ou d’Industrie Canada (IC), ou les deux, interdisent tout ajustement ou toute modification de ce récepteur et/ou...
  • Page 12 100 °C (212 °F) ou l’incinérer. Mettre les piles au rebut de manière appropriée. Remplacer les piles UNIQUEMENT par des piles bouton 3V CR2032. ATTENTION ATTENTION Pile LiftMaster.com AVERTISSEMENT AVERTISSEMENT Toutes les appellations commerciales ici utilisées sont les marques déposées des fabricants représentés. AVERTISSEMENT AVERTISSEMENT ©...