HearthPro QFH-5000 Manuel D'instructions page 4

INSTALLATION INSTRUCTION
1. Loosen the 4 screws to remove the grill box of the unit.
2. Loosen 1 screw to remove the mounting bracket.
3. Keep the unit at least 8' (2.4m) away from the floor. This minimum distance
must be maintained.
4. Once the mounting position is decided, mark the drill-hole positions in the
ceiling for the mounting bracket.
5. Drill the required holes with diameter fit for the anchor provided for positioning
the mounting bracket.
6. Insert the anchors.
7. Attach the mounting bracket to the ceiling and secure with mounting screws.
8. Loosen 2 screws to remove the wiring compartment cover.
9. Hook the unit to the mounting bracket and let the unit hang from the mounting
bracket.
10. Run the electrical supply cable to the wiring compartment of the unit. Connect
the grounded wire to the grounding screw and connect the electrical wires with
provided wire connectors.
WARNING:
electrician according to the electrical safety. The ceiling heater must be
grounded in accordance with all national and local building codes.
11. Replace the wiring compartment cover and lock in place with 2 screws.
12. Secure the unit to the bracket with screw.
13. Replace the grill box and secure with screws.
All wiring must be installed by a certified
- 4 -