Publicité
Les langues disponibles
Les langues disponibles
14 electrolux
You can change or cancel the delayed start time
at any time before you press the "Start/Pause"
pushbutton by pressing the "Delay start" pushbut-
ton
again (when all indicators are off, the wash
programme will start immediately).
If you have already pressed the "Start/Pause"
pushbutton and you want to change or cancel the
delayed start, proceed as follows :
• To cancel the delay start and start the cycle im-
mediately, press "Start/Pause" and then "Delay
start"
. Press "Start/ Pause" to start the cycle.
• To change the timer delay period, you must go
through the "Stop" position
ramme your cycle.
The lid will be locked during the delayed start time.
If you need to open it, you must first pause the ap-
pliance by pressing the "Start/Pause" pushbutton.
After closing the lid again, press the "Start/Pause"
pushbutton.
Start of the programme
Press the "Start/Pause" pushbutton to start the
cycle ; the corresponding light will come on green.
It is normal for the programme selector to remain
stationary during the cycle. The light correspond-
ing to the current cycle is illuminated.
+
: Prewash + Wash
+
: Rinse + Spin
: End of cycle
Interrupting a programme
Adding washing during the first 10 minutes
Press the "Start/Pause" pushbutton : the corre-
sponding light will flash green while the appliance
Programmes table
Programme / Type of washing
1)
Cottons
(cold - 90°) : White or colour,
e.g. normally soiled work clothes, bed linen,
table linen, body linen, towels.
Synthetics (cold - 60°) : Synthetic fabrics,
body linen,fab, coloured farics, non-iron shirts,
blouses.
Easy iron (cold - 60°) : Reduces creasing
and makes ironing easier.
Delicates (cold - 40°) : For all delicate ma-
terials, for example curtains.
Wool (cold - 40°) : Very delicate items
carrying the "wash by hand" label.
Handwash (cold - 40°) : Very delicate
items carrying the "wash by hand" label.
Silk (30°) : Fabric machine washable at
30°C.
is paused. The lid can only be opened around 2
minutes after the washing machine has come to a
stop. Press the "Start/Pause" pushbutton again to
continue the programme.
Modifying the programme in progress
Before making any changes to the current pro-
gramme, you need to pause the washing machine
by pressing the "Start/Pause" pushbutton. If the
modification is not possible, the "Start/ Pause"
pushbutton flashes red for a few seconds. If you
still decide to change the programme, you must
cancel the current programme (see below).
Cancelling the programme
and reprog-
If you want to cancel the programme, turn the pro-
gramme selector to the "Stop" position
End of the programme
The washing machine stops automatically, the
"Start/Pause" pushbutton goes out and the light
"End of cycle"
opened around 2 minutes after the washing ma-
chine has come to a stop. Turn the programme
selector to the "Stop" position
ing. Unplug and close water inlet tap.
Standby mode
If the appliance is on but no commands are selec-
ted for 10 min before or after a cycle, it goes into
standby mode. All the lights go out and "Start/
Pause" flashes slowly.
To exit standby mode, simply press any pushbut-
ton or turn the programme selector.
Load
5,5 kg
2,5 kg
1,0 kg
2,5 kg
1,0 kg
1,0 kg
1,0 kg
comes on. The lid can only be
Possible options
Night silence plus, Rinse hold, Pre-
wash, Super quick, Eco
Delay start
Night silence plus, Rinse hold, Pre-
wash, Super quick, Eco
Delay start
Rinse hold, Prewash, Extra rinse, De-
lay start
Night silence plus, Rinse hold, Pre-
wash, Super quick, Extra rinse, Delay
start
Night silence plus, Rinse hold, Delay
start
Night silence plus, Rinse hold, Delay
start
Night silence plus, Rinse hold, Delay
start
.
. Remove wash-
2)
, Extra rinse,
2)
, Extra rinse,
Publicité
