Heatwave NP5877 Mode D'emploi page 3

INSTRUCTIONS
Follow these 3 easy steps
1
2
3
1) Submerge the vacuum tube below the water level.
Make sure the discharge hose is positioned on the
ground and away from the user.
2) Keeping the vacuum tube under the water, pump it up
and down until water starts to flow out of the discharge
hose. Pump several more times for a faster flow. As the
spa drains, move the vacuum tube around the tub to
pick up any debris.
3) As the water level lowers, hold the vacuum tube
straight so it is flush with the floor of the spa. This will
ensure that all the water is completely drained from
the tub.
3