Installing The Handlebars - JUPITERBIKE Defiant Mode D'emploi

INSTALLING THE HANDLEBARS

Lift the clamp on the top of the
stem, unscrew the thumb screw
and remove the clamp. Open the
latch.
Close the latch and reattach the clamp. Tighten the thumbscrew then
press the clamp down to lock.
Raise the handlebar stem, then
starting with the latch all the way
down, lift the latch until it locks.
Make sure the handlebar stem
is secured in the upright position
before moving on.
Center the handlebar in the open
latch and rotate to the desired
position.
5