Axis Communications T8125 Guide D'installation page 10

Page 10
Installing the Unit
1. Verify that the 24 V AC power source is turned off.
2. Connect cables to the AXIS T8125 Input terminal connector (12
AWG for each terminal or 2X16 AWG for each terminal).
3. After connecting the cables to the terminal connector securely
tighten all 4 connector screws. See Figure 3.
4. Connect the cables from the data switch's patch panel to the Input
Ethernet port (DATA IN). See Figure 4.
5. Connect the terminal to the output terminal port (DATA & POWER
OUT). See Figure 4.
6. Turn on the 24 V AC power source and verify appropriate leds
indication. See table on page 12.
AXIS T8125 AC 24 V Midspan 60 W