Samsung HW-J8500R Manuel D'utilisation page 6

CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 17 for instructions.
Method 1. Connecting with a Cable
Check the HDMI OUT (TV-ARC)
port of the Soundbar main unit.
Bottom of Soundbar
1. Connect the HDMI cable (not supplied) as in the picture above.
2. TV ARC appears on display of the product and TV sound is output.
c If TV sound is not output, press the
remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is changed to
TV ARC and TV sound is output.
c If the Soundbar main unit display does not change to TV ARC, check the cable connections.
c You can conveniently control the volume of the Soundbar and interlock power supply.
HDMI Cable
(not supplied)
HDMI IN
(TV-ARC)
Check the (TV-ARC) at
HDMI IN port of your TV.
TV ARC
button on the top of your Soundbar or the SOURCE button on the
· 6 · English
Soundbar