Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
If excess liquid enters the product, immediately unplug the product from any connected power
sources or devices.
Do not fill the water cavity directly from tap water as this may damage the item
It is not recommended to operate mist without water
Do not or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color
change, etc.), discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to
incinerate it)
Do not leave this product unattended while it is in use
Make sure that there are no obstructive objects blocking the mist slot as it may cause faulty item
usage and/or liquid spills
Do not remove cover from base when item is in operation
This product is not a toy: KEEP AWAY FROM CHILDREN
At the end of each use, it is recommended to unplug the power cable & empty liquid content
Do not tilt the product when it is filled with liquid. Tilting can cause water spills.
The HW102 is a portable mist humidifier & scented oil (not included) diffuser with multi-color LED
lights. Please see below user instructions.
HW102 Specifications
Item No.: HW102
Model No.: CC178152
Product Size: 173.5g
Net Weight: 9 ¾" x 1"
Rate voltage: 2W ± 0.5W
Power Output: DC 5V
Quality of mist: 30mh/hour
Diffuser range: 10-15 square meters
Accessories: 2mm pin/USB power cable included & user manual
WARNING
Safety Precautions
HW102 User Manual

Publicité

loading

Sommaire des Matières pour Spector&Co SPECFIT HW102

  • Page 1 WARNING Please read and follow all of the instructions & safety precautions detailed below prior to using this product. Failure to do so may result in serious personal injury and / or property damage. Safety Precautions  Do not expose this product to heat sources (including open flame or direct sunlight) ...
  • Page 2 HW102 Product Map Timer option Placement dot (cover) Placement dot (base) Mist button Light button HW102 Operation 1. ON: insert 2mm pin into the HW102 & connect the USB output to a power source (not included) 2. Twist the HW102 cover from base & insert liquid into the base. (NOTE: the liquid should be no less than min.
  • Page 3 HW102 Instruction for Light option 1. Press LIGHT button once: slow multi-colored interchanging LED light mode 2. Press LIGHT button more than once: unchanging colored LED light mode 3. To power off light, press & hold the LIGHT button NOTE: Mist option does not need to be activated to enjoy the LED light of HW102...
  • Page 4 AVERTISSEMENT S'il vous plaît lire et suivre toutes les instructions et consignes de sécurité indiquées ci-dessous avant d'utiliser ce produit. De ne pas prendre ces précautions pourrait entraîner des blessures graves et/ou des dommages matériels. Précautions de sécurité  Ne pas exposer ce produit à des sources de chaleur (Incluant des flammes nues ou la lumière directe du soleil) ...
  • Page 5 Minuterie Positionnement (couvercle) Positionnement (base) Bouton brouillard Bouton lumière Fonctionnement du HW102 1. Allumer : insérer la broche de 2mm dans le HW102 et connecter la sortie USB à une source de courant (non incluse). 2. Tourner le couvercle du HW102 et verser du liquide dans sa base. (NOTE : le niveau de liquide ne doit pas excéder la ligne max.
  • Page 6 1. Appuyer sur le bouton LIGHT une fois: une LED avec des couleurs changeantes s’allumera 2. Appuyer sur le bouton LIGHT plus d’une fois : une LED fixe en couleurs s’allumera 3. Pour éteindre la lumière, appuyer sur le bouton LIGHT et maintenir enfoncé NOTE: Il n’est pas nécessaire d’activer le brouillard pour allumer la LED du HW102...
  • Page 7 ADVERTENCIA Por favor, lea y siga todas las instrucciones y precauciones de seguridad que se detallan a continuación antes de utilizar este producto. El no hacerlo puede traer como consecuencia lesiones personales graves y/o daños materiales. Precauciones de seguridad  No exponer el producto a fuentes de calor (Incluyendo llamas vivas o la luz directa del sol) ...
  • Page 8 Diagrama del producto HW102 Temporizador Posicionamiento (cubierta) Posicionamiento (base) Botón niebla Botón luz Funcionamiento del HW102 1. Encender: Insertar la clavija de 2mm en el HW102 y conectar la salida USB a una fuente de corriente (no incluida). 2. Girar la cubierta del HW102 y verter líquido en su base. (NOTA: el nivel de líquido no debe exceder la línea max.
  • Page 9 Funcionamiento de la LED del HW102 1. Oprimir LIGHT una vez: una LED de colores cambiantes se encenderá 2. Oprimir LIGHT más de una vez : una LED de colores fijos se encenderá 3. Para apagar la LED, oprimir LIGHT y mantener oprimido NOTA: No es necesario activar la niebla para encender la LED del HW102...