Baby Trend Kid Cafe Snap Tech 5-in-1 Manuel D'instructions page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
TO USE SAFETY BELT
WARNING:
It is
recommended that only children
capable of sitting upright
unassisted use the high chair in
the upright position.
WARNING:
Prevent
serious injury or death from
falls or sliding out. Always use
the restraint system. The child
should be secured in the high
chair at all times by the 5-point
restraining system, either in
the reclining, semi-reclining or
upright position.
The Tray is not designed to hold the child in
the chair. Stay near and watch child during
use.
NEVER
leave child unattended.
8)
• The shoulder straps of the 5-point
harness have 2 attachment positions.
Select the position that places the
shoulder strap level with, or below, the
top of the child's shoulder (Fig. 8a).
• Carefully place the child in the seat and
position the safety harness around the
child's waist and over the shoulders.
Place the crotch strap between the
child's legs. Insert the male end of each
shoulder/waist belt into the buckle on the
crotch strap. Tighten the harness to be
snug around the child's waist and over the
child's shoulders (Fig. 8b).
9
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO RELEASE THE CHILD
9)
RECLINE SEAT
10)
TO ADJUST SEAT HEIGHT
Fig. 8a
11)
Adjust for a snug fit
Fig. 8b
• To release the harness, push Button on
Center Clasp, the two Harness Buckles
will pop free (Fig. 9).
• Squeeze recline lever on back of the
seat and adjust to the preferred recline
or upright position (Fig.10).
Use caution not to trap arms, hands and
fingers when adjusting recline positions.
WARNING:
Do not adjust
seat height with child in seat.
Adjust seat height before placing
your child in the high chair.
WARNING:
Always
check that the height adjustment
bracket is level and both left and
right sides locked before placing
child in the high chair.
WARNING:
Never rest
the height adjustment bracket
on the locking pins.
• Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 11a) and adjust to the
ideal position (Fig. 11b).
DO NOT adjust with child in the seat.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Center Clasp
Fig. 9
Fig. 10
Release
Handle
Fig. 11a
Highest Position
Lowest Position
Fig. 11b
10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ic38780a

Table des Matières