Napoleon NAPMM22 Instructions De Fonctionnement

PROBE SHIELD -
Remove the probe shield before use.
Re-install the probe shield after use.
PROBE - Used to measure moisture content.
Press the probes approximately 1/8" into a
log to measure its moisture content.
LOW BATTERY SYMBOL -
Displays on screen if the batteries
need to be replaced.
HOLD SYMBOL - Displays on
screen if a value is being held.
LIGHT - Press to activate
the back light.
To obtain an accurate moisture reading, split the wood sample to be tested and insert the probes into the freshly exposed
wood.
DIGITAL MOISTURE METER
OPERATING INSTRUCTIONS
THE PROBES ARE VERY SHARP. KEEP AWAY FROM CHILDREN.
REMOVE BATTERIES WHEN NOT IN USE.
KEEP THE MOISTURE METER CLEAN AND DRY.
WARNING
!
16
- +
%
H
POWER
MOISTURE METER
DIGITAL DISPLAY - Displays moisture
content.
Test range: 5% to 40%
Operating Temperature: 0 to 40ºC
0 - 70% Relative humidity
HOLD - Press to keep the current
value on screen. Press again to
release the value.
POWER - Press to turn the
moisture meter on/off.
When the power is turned on, the
screen will display 00%.
W415-0936 / A / 10.11.11