Publicité
Les langues disponibles
Les langues disponibles
Step 1: One Hanging Plate (#6) has been mounted to the top of your Dartboard Cabinet. The other one, from
parts, will be mounted to wall studs, or use Plastic Anchors (#5) if in drywall. Have someone hold Cabinet
(without the Bristle Dartboard (#1) to the desired location and height (distance from bull's eye to the ground
should measure 5' 8") on your wall and use a pencil to mark a level line where the holes will be drilled for
hanger. Make sure holes are drilled deep enough to ensure the Plastic Anchors (#5) are ush with the wall.
#5
#2
#5
#2
Wall
Step 2: Select a drill bit that is roughly the same diameter as the Plastic Anchors (#5) included in the hardware
pack. Once holes have been drilled, use a hammer and tap the Plasitc Anchoors (#5) into the holes. After the
anchors are secure, attach the Hanging Plate (#6) using 2" Screws (#3).
Step3: Once the Hanging Plate (#6) has been attached to the wall, hang the Cabinet (without the Bristle
Dartboard (#1) using the pre-installed cabinet hanging plate onto the wall. Next, hang the Bristle
Dartboard (#1) onto the Dartboard Mounting Bracket (#9) that is pre-installed on the inside of the Cabinet.
5
Publicité
