Hathaway OUTLAW FREE STANDING Instructions De Montage page 6

THANK YOU! ASSEMBLY INSTRUCTIONS (CONT.)
Step 5: Attach the dart holder #12 using the pre-drilled holes on the door with screw #18.
Attach the doors #8 to the bottom cabinet with hinges #13 and screw #16 and screw #17.
Attach the legs #11 to the cabinet bottom with washer #15 and bolt #14. Note: see Step 7
if attaching to wall. Attach the door handles #22 to the doors. Attach the magnet steel plates
#27 to pre-drilled holes in top outer cor ners on the inside of the doors with screw #29.
Step 6: Screw thread bolts #21 into the bottom cabinet and attach the top cabinet to the bottom
cabinet with gears #20 as shown below.
#29
#27
#12
#18
#22
#13
#8
#16
#17
#11
#15
#14
#8
#20
#21
#21
#16
#11
#21
6