Schematic Diagram Of Battery Connection; Safety Precautions In Driving Operation; Structure Of Whole Vehicle - Enerwatt EWB-TRI48V-R Guide D'utilisation

1. SCHEMATIC DIAGRAM
OF BATTERY CONNECTION
Notes: Above all, link the end of each connector to the negative pole of the storage battery.
Then, connect the other end to the positive pole of the battery.
After, put the no. 5 positive lead wire of the battery together with the positive pole of the fuse.
Then take another single connector and connect it to the other end of the fuse.
Next, link the other end of this connector to the positive pole (N) of the charging hole.
Finally, put the no. 4 negative lead wire together with the negative pole (L) of the charging hole.

2. SAFETY PRECAUTIONS IN DRIVING OPERATION

Please comply with the traffic rules and limit the speed within the safe speed range.
(Please note that the safe speed of this electric tricycle is 20 km/h.)
Before driving, please familiarize yourself with the manual.
To familiarize yourself with the principles of safe driving, train in an open space to gain driving skills.
WARNING!
Do not lend the electric tricycle to another person who does not know how to drive it.
It is dangerous to drive using one hand, no hands or after drinking.
Drive at a safe speed to avoid injury and damage to the vehicle.
• Please use caution in rainy conditions.
Driving in rain is dangerous due to slippery roads. Therefore, do not drive at high speeds and use caution when turning.
Please remember to brake in advance to prevent accidents.
• Use a helmet. Please wear a helmet and fasten the seat belt when driving.
3. STRUCTURE OF WHOLE VEHICLE < 1 >
1. Rear brake
2. Horn button
3. Head light switch
4. Steering light switch
5. Speedometer
6. Front brake
7. Throttle
8. Grip
9. Three gear speed switch
10. Emergency switch
1. Head light
2. Power supply switch
3. Front suspension
4. Tire and tube
5. Seat
6. Motor
7. Front steering lights
8. Rear mirror
9. Charging socket
MODEL: EWB-TRI48V-R
USER'S MANUAL
2