Jumpers - Rami PRT 666 Manuel Utilisateur

JUMPERS

JP8
A :
JP 1
B :
A :
JP 2
B :
A :
JP 3
B :
A : Microphone Line output is controlled by the ON/OFF internal flip.
JP 7
B : The Microphone Line output is always active whatever the ON/OFF position.
A : Order on the pin 21 of sub-D is active if the microphone is OFF
(External mute order )
JP 8
B : Order on the pin 21 of sub-D is active if the microphone is ON
(example : on air order)
A : Phantom power supply : ON
JP 10
B : Phantom power supply : OFF
ENGLISH
Using Order 1 order and loop to order 1 and order 2.
Using Order 1 order and loop to order 1only.
Using Order 1 or Order 2
Using Order 1 or Order 2
When PRT 666 is "Stand alone", allows to turn on the internal ON AIR indicator.
No action on internal ON AIR indicator (controlled by external loop).
JP10
mute microphone signal on line output.
no effect on line output.
16
Rami - PRT 666