Functional Advice; Led Lifetime Advice - AVID LABS AVERE 3 PAR CAN Mode D'emploi

Safety Information

FUNCTIONAL ADVICE

The bulb complies with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.

LED LIFETIME ADVICE

LED lifetime is determined by the gradually declining brightness
of an LED over time where, the point of 50% brightness reduction
marks the defined end of its lifetime. The driving factor of this effect
is the heat that the chip inside the LED is exposed to. While an LED
may reach 100,000 hours under ideal circumstances, the real-world
lifetime may be 25,000 to 50,000 hours. This may be less if the LED
is exposed to excessive heat, which can be caused by continuously
running all LEDs inside this device at full power and operating the
unit in high environmental temperatures. If improving the lifetime
of the LED is a concern, keeping the operating temperature lower
is advised. This may include forced air external cooling and/or
the reduction of overall intensity.
Unique lighting solutions.
8