Publicité
Les langues disponibles
Les langues disponibles
8.
Press UP/CID or DOWN/OUT key to choose Set date, press MENU key to enter, use UP/CID or
DOWN/OUT key set date (month, day), and then press MENU key to conform.
SETTNG KEY TONE
When the phone shows Phone setting, press MENU, navigate with UP/CID or DOWN/OUT button until the
display shows Key tone,
Press MENU key to confirm, by UP/CID or DOWN/OUT button to select Disable or Enable, press MENU key
again.
Note: If batteries are not loaded, there will be no key tone function.
SETTING RING MELODY
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Ring melody.
The default ring melody is Ring 2 (8 kinds of ring melody can be chosen).
To set the ring melody:
1. When the LCD displays Ring melody, press MENU. LCD shows Ring X(X=1～8),
2. Press UP/CID or DOWN/OUT to choose ringer and confirm with MENU key.
SETTING FLASH TIME
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Set flash time
To modify the flash time:
3.
When the LCD displays Set flash time, press MENU. LCD displays current flash time.
4.
Press UP/CID or DOWN/OUT keys to modify the flash time and press MENU to confirm.
The flash time parameter can be changed to match the requirements of specific PABX or networks. The flash
time can be set as 80, 100, 120, 180, 280, 300, 600 and 1000 ms, the default value is 280 ms.
SETTING BARRING NUMBER
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Call barring. There are two choices: Barring number, Modify code.
Setting barring number
1. Press MENU key and navigate with UP/CID or DOWN/OUT button select Barring number. You will see Enter
code displayed on LCD. Input the password (Default is 0000) and press MENU key.
2. The LCD will display Barring number 1 (total 5 group for you selection), press MENU key to enter.
3. By numerical keys to input the head numbers at most 6-digit which you want to bar dialing. Press MENU key
to confirm.
4. By the same way to set the other four group.
Note: When the barring number function active, it will lock the number if the head of dialing number is same
as the setting number. For example, it you have set "123" as a barring number, if you dial number is 123xxxxx,
it will be locked.
Modify code
Press MENU key and navigate with UP/CID or DOWN/OUT button select Modify code. You will see Old code
displayed on LCD. Input the password (Default is 0000) and press MENU key. Then input a New code to
replace the old one, press MENU key to confirm.
SETTING DIALING MODE
When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows Dialing type.
DTC-410
21
Publicité
