Fein ASte649-1 Mode D'emploi page 14

OBJ_BUCH-0000000004-001.book Page 14 Tuesday, April 6, 2010 1:05 PM
en
14
en Original Instructions for Jigsaw.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø Diameter of a round part
Max. work-piece thickness for steel with up to 400 N/mm
Fe 400
Max. work piece thickness in steel (INOX)
Fe INOX
Max. work-piece thickness for aluminium with up 250 N/mm
Al 250
Max. work piece thickness in wood
Min. inside curve radius
r
Weight according to EPTA-Procedure 01/2003
Low stroke rate
High stroke rate
2
2