DURAVIT B.0 GK0900 008U Notice De Montage Et D'utilisation page 6

1
> Prior to valve install, be sure to flush hot
and cold water lines to purge out debris and
sediment.
3
> Connect water inlet lines to valve.
> When facing valve hot on the left and cold
on the right.
> The top outlet pipe is for the supply line to
the shower.
> *If using B05290 012U, then bottom outlet
will also be utilized.
6
MAL_57492/21.05.1
2
> Inspect check stops and make sure they are
turned to the "Off" position but turning to
the counter-clockwise.
4
MIN
MAX
> Remove plastic cover plate.
2
1