CAME MS-N5016-UH Manuel De Configuration Et D'utilisation page 42

ACCESSING THE NVR RECORDER
Searching for the NVR recorder using Smart Tools
If you don't know the NVR recorder's IP address, you can use the Smart Tools application to automati-
cally detect Milesight NVRs connected to a LAN.
To find the IP address of an NVR, do the following:
❶ In the search window enter the serial number (SN) or Mac address to search for the NVR you want;
❷ This area displays a list of all the NVRs connected; select the NVR you want from the list and press
button ❸ to change its parameters (e.g. IP address, port, netmask, gateway and DNS). Click but-
ton ❸ again to save the settings (the NVR's default IP address is 192.168.5.200 )
❹ The Browser button gives direct access to the NVR management web page (the NVR's default user
name and password are, respectively, "admin" and "ms1234").
Note: for further information on Smart Tools, refer to the user manual.
❷
❶
❸
❹