KLASS Fan TRAMONTANA Manuel D'utilisation page 18

2
- Select the right down rod depending
on the height of your ceiling.
- If neither of the down rods fits,
contact your fan distributor.
- Remove the locking pin, the two
screws off the coupler.
- Place the downrod through the
canopy, and route the electrical cables
through the extension.
- Insert the extension into the coupler,
insert the coupling screws and the pin,
tighten the two screws on the coupler
and close with the cover
3
- Fixing blade to the motor assembly
by two screws.
- Repeat step for all blades.
4
Hang the fan motor housing on the
mounting bracket, ensure the ball joint
locating the groove aligns with the
notch on the mounting bracket.
coupler
Motor assembly
Blade
Notch
Locating groove
16
power cord
canopy
canopy
cover
coupler
cover
bolt
locking pin
Screws