Operation; Remote Control Interface - Wow W100 Manuel De L'utilisateur

Operation

EN
The wow Fan can be easily controlled directly from the unit as well as with the supplied
remote control.
Depending on room size and intensity of the odor to be neutralized, the wow Fan can be
set to either weaker or stronger in order to get the optimum results. If the faint natural
smell of the wow Odorkiller becomes noticeable, the fan is set too high and should be
turned down one level.
To ensure smooth operation and effectiveness, wow Odorkiller and Fan should not be
exposed to direct sunlight and extreme heat. Otherwise, the natural ingredients in wow
Odorkiller will substantially impair the desired effect.
6
All manuals and user guides at all-guides.com
Connecting the remote control:
The original supplied remote control has already been completely synced with the wow
Fan and can be put into operation immediately.
To pair a new or different remote with the wow Fan, simultaneously press the two
buttons + and – that are found on the unit until a bar – is shown on the display.
Then press any number on the remote control to be connected until this number appears
on the display. This usually takes a few seconds.
The remote control can be connected with other wow Fans using the same method, so
that more Wow Fans can be controlled with one remote control at the same time.
Disconnecting the remote control:
In order to disconnect an already connected wow Fan and remote control,
simultaneously press the two buttons + and – that are found on the unit until a bar – is
shown on the display.
Then press any number on the remote control for one second.
If the status on the display reverts to a number, the remote control is disconnected.
If a new remote control has to be connected with the wow Fan, the previously connected
remote control is disconnected automatically.
EN
7