Publicité
Les langues disponibles
Les langues disponibles
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
-1
10
!
The load leg must be installed
correctly with green indicator.
Please refer to baby mode and
toddler mode and junior mode in
section to use the stages™ isofix.
Removing the base
To remove base from the vehicle
press the release button
11
-1
pull the base back from the seat.
11
-2
Then press
12
-1
and pull back on
the ISOFIX connector
-2
12
!
For transporting base, press
ISOFIX release button
13
-1
move back ISOFIX connector so it
is folded completely
-2.
13
11
10
-2
10
1
11
and
2
12
2
13
and
2
Installing the stages™ isofix seat
in the Base
see images
Baby Mode (Rearward Facing Mode)
2
Rearward Facing Newborn - 4 years old
Recline position
!
Please install the base on the vehicle seat (with rebound bar
attached), then install the shell, and then put the child in the stages™
isofix.
!
Ensure rebound bar is fitted to base.
!
The most convenient way to install the shell is when the base is in
th
the 7
position.
1
!
Pull up on the stages™ isofix seat
to be sure it is securely latched into
the base.
!
Please ensure that there is no gap
between the vehicle seat upper
surface and the bottom of the
base.
1
!
Make sure to open the side impact
protection shield for more side
impact safety.
shield opposite the vehicle door can
be closed to allow more seating
space.
14
1
-
14
38
Position 1-7
-1
The side impact
14
-2
14
2
1
12
Publicité
