Symbols And Icons; General Safety Directions For Power Tools - ULTIMATE SPEED UPM 120 B3 Traduction Des Instructions D'origine

GB IE

Symbols and icons

Symbols on the device:
Warning!
Read the manual!
Wear eye protection
Wear breathing protection
Wear ear protection
Do not expose the unit to rain.
Remove the plug from the mains.
Immediately if the cable is dam-
aged or cut.
Safety class II (Double insulation)
Electrical machines do not belong
with domestic waste
Guaranteed sound power level
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage
Precaution symbol with information
on prevention of harm / damage
Pull out the mains plug.
Connect the machine
to the power supply.
Notice symbol with information on
how to handle the device properly
16
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied plugs and matching outlets will
reduce risk of electric shock.