Table des Matières
Publicité
1. Freezer shelves
2. Freezer door shelves
3. Freezer drawers
4. Freezer drawer covers
5. Levelling feet
11. ice tray box
BEFORE INSTALLING THE APPLIANCE
Before connecting your appliance to the power supply, check that the voltage stated on the rating label
of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all times. To turn
off main power to the appliance, turn it off and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.
INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned. Adjust the front feet until the appliance is level and stable.
To achieve this result, the front feet shall be adjusted to be higher than the rollers on the bottom of the
appliance).
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 16 °C and 38°C. If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the
ambient temperatures are exceeded for long periods, the temperature in the freezer compartment will
rise above -18°C and food spoilage may occur.
SBS 540-4 A+ Inox look
6. Fridge shelves
7. Fridge lidded door shelf
8. Fridge door shelves
9. Fridge vegetable containers
10. Covers for fridge vegetable containers
Version EN 09/2016
Page 6 from 15
Publicité
Chapitres
Table des Matières
