Download And Install App; Installation Accessory; Installation Method - Carrier OSK102 Manuel Du Propriétaire

2. DOWNLOAD AND INSTALL APP

• Android System:
Scan QR Code or go to Google play, search for
'Carrier air conditioner' app and download it.
• iOS System:
Scan QR Code or go to App Store and search for
'Carrier air conditioner' app and download it.
Android

3. INSTALLATION ACCESSORY

Select the installation location
Don't install at the place which is covered with heavy
oil, vapor or sulfureted gas, otherwise, this product
would be deformed that would lead to system
malfunction.
Preparation before installation
1. Please confirm that all the following parts have
been supplied.
No. Name
1 Smart port
Installation and
2
owner's manual
3 Screws
4 Wall plugs
5 Smart kit
The connective wires
6
group-1
7 4-core shielding wire
8 Remote controller*
9 Battery*
Remote controller
10
Manual*
* These parts can be removed, which have been
included AC unit.
iOS
Qty. Remarks
1 ————
1 ————
M4X20 (For
3 Mounting on the
Wall)
For Mounting on the
3
Wall
1 ————
1 See Fig.4-3
1 See Fig.4-3
1 ————
2 ————
1 ————

4. INSTALLATION METHOD

1. WLAN controller structure size figure
2. Wiring Principle Sketch:
Applicable to WF-60A1 only
-----------------------------------
red
-----------------------------------
black
-----------------------------------
yellow
-----------------------------------
brown
4-Core Shield Cable, the length is
WLAN control box
decided by installation
4. INSTALLATION METHOD
3. Wiring figure
4-core shielding wire
• Connect the male joint of the connective wires
group-1 to the mainboard, then connect the other
side of the connective wires group-1 to the 4-core
shielding wire of the smart port.(See Fig.4-3)
• If want to extent the wire, please use extension
cord (purchased separately). (See Fig.4-3)
4.Remove the upper part of the smart port
• Insert a slot screwdriver into
the slots in the lower part of the
smart port (2 places), and remove
the upper part of the smart port.
(Fig.4-4)
GB- 2
Fig 4-1
Insert of the mainboard CN40
red
black
yellow
brown
Indoor unit mainboard
Extension cord
(purchased separately) Mainboard
The connective wires group-1
Fig 4-3
Slots
Fig 4-4
Fig 4-2
CN40