Pleasant Hearth FA498ST Mode D'emploi page 4

ASSEMBLY INSTRUCTIONS
1. Attach foot (B) to screen frame (A) on one side by
inserting 2 M6 x 25 bolts (BB) through predrilled holes
in the foot (B) and through the screen frame (A).
Secure with 2 M6 nuts (CC) and tighten securely using
included wrench and a screwdriver (not included).
Repeat on opposite side.
Hardware Used
BB Bolt M6 x 25
CC
Nut M6
DD
Wrench
2. Attach handle (C) to screen frame (A) on one
side by inserting 2 M6 x 12 bolts (AA) through
predrilled holes in handle (C) through the screen
frame (A). Tighten securely with a screwdriver (not
included) and repeat on opposite side.
Hardware Used
AA
Bolt M6 x 12
3. Hang the tong (F), shovel (D), tampico brush (G)
and poker (E) on screen frame (A) by placing them
on each individual hanging peg.
1
CC
BB
x 4
x 4
B
x 1
2
AA
C
x 4
3
4
A
A
!"#!
)
A
F
D
G E