Publicité
Les langues disponibles
Les langues disponibles
Connections
Changing the Wireless Microphone's Battery
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
Connecting the optional wired Microphone
u
When the wireless mic battery indicator
flashes, it shows it is out of power. Change
the batteries as follows:
1
Unscrew the bottom of wireless
microphone.
2
Replace the batteries with 2 x "AA"
size/LR6 battery.
3
Replace the bottom of wireless
microphone and screw it on.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer's
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
Connect the wired microphone (not
included) into Mic jack u (when desired).
NOTE: Maximum of two microphones
(wired or wireless) connected to the
unit at one time. After inserting the
wired microphone (Mic 3), the wireless
microphone 1 (Mic 1) will be automatically
turned off.
— E8 —
Publicité
