Earphones Use - Nyrius Oracle NAEB500 Guide De L'utilisateur

Left and Right Speakers
There are "L" and "R" markings on each earpiece. "L" is for the left ear and "R" is for the right ear.
Attaching Eartips to the Speakers
Choose an eartip of your size and liking, it may be necessary to test several eartips to decide which size fits your ear the
best. All included eartips easily clip onto the end of each speaker. You will feel them gently snap into place on the speaker
when they are secure.
Proper Insertion and Removal of Earphones
1. Use your right hand to hold the earphone marked with an "R".
2. Use your left hand to pull up and back on your right ear to straighten the ear canal. This will allow for a better fit of
the earpiece.
3. Insert the right earphone into your ear so that it seals completely and comfortably in your ear.
4. Repeat with the left earpiece. Using your right hand to pull back on your ear while you insert the left earpiece with
your left hand.
5. To remove the earphones, slowly pull them out with a twisting motion to gently break the seal.
Note: It is important that you do not insert the earphones so deep that your ears feel completely plugged!
Using the Shirt Clip
A shirt clip comes attached to the wire to secure your earphones from easily falling out of your ear. It absorbs the tension
that may occur during movement while wearing your earphones.
1. Squeeze the end of the clip to open the fastening end, and slip it over part of your shirt or collar.
2. Release the end of the clip to secure.
Asymmetrical Cord Design
The right earphone cord is longer than the left. The asymmetrical cord is designed to be draped behind the neck before
the earphone is placed in the ear. This design offers several advantages:
1. Reduces strain on the wires from the cords dangling.
2. Conventiently rests on your neck when the earphones are not in use.
3. Helps with optimal fit in your ear.
EARPHONE USE
- 6 -