Whale GK1512 Instructions D'installation Et D'utilisation page 4

Step 4: The Gulper 220 can be attached to the Grey Waste Tank using the screws provided.
Step 5: Secure all hosing onto the selected ports using appropriate hose clamps, as shown in Figure 8. Check no leaks occur. Do not overtighten hose clamps.
Step 6: Wiring: See Figures 9 and 10.
Step 7: Instructions for Use
Once installed, turn on shower or faucet to fi ll grey waste tank. Ensure that the pump is operating and waste water is being removed from the tank. Note: If using a
seacock, ensure it is open before use.
Figure 7 Attaching Gulper 220 to the Grey Waste Tank
Figure 8 Securing Hose to Tank Port
Figure 9 Wiring Diagram
Primary sensor wires -
connect to grey
Connect to Grey Waste
Pump
Figure 10 Wiring from the Lid
4