ENERGY SISTEM Wireless BT8 Manuel De L'utilisateur page 21

IMPORTANT: To keep battery in good condition, do not charge the battery
until has been completely discharged. In the same way, do not interrupt the
charging process: wait until the battery is fully charged.
BLUETOOTH
®
≥
While your Energy Wireless BT8 is ON, press and hold the synchronization
button (2) for 5 seconds, until the LED starts blinking red and blue.
In that moment, the Energy Wireless BT8 will be trying to sync with
another Bluetooth® device. Then, you should start the scan as well with
your tablet, Smartphone, laptop, etc. Once you have found your Energy
Wireless BT8 in your device, the headphones will pair with your device
automatically, without asking you for any security code.
ACTIVE NOISE CANCELLING (ANC)
≥
One of the Energy Wireless BT8's most important features is the "Active
Noise Cancelling" (ANC), which attenuates external noises, enhancing
your music and providing you with isolation from wherever environment
you are. It is the best choice when you are travelling, working at the office,
sitting in your home, etc. and you wish to fully enjoy you music without
external distractions.
To activate this function you just have to use the ANC switch (4). If the
ANC function is active, a white LED will be turned on, without blinking.
This function can be used both in Bluetooth® and Line-In modes (Jack
3.5mm).
All manuals and user guides at all-guides.com
PARING
21