Delete; Date & Time; Current Time; New Time - Eneo IPD-72A0003M0B Guide D'installation Rapide

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Click the Edit tab, then new pop-up window appears.
3. Type a password (1 to 8 alphanumeric characters) and retype confirm password.
The user name can't be modified.
4. Select one of the groups you wish to assign to the user.
5. Click the OK button to save the settings and modify a user.

Delete

To delete a user:
1. Select one of the User Names in the User List you want to remove.
2. Click the Delete tab. A dialog box appears with confirmation message.
3. Click the OK button. The user profile is removed from the User List profile.
Date & Time

Current Time

Shows the current date and time. Clicking SAVE tap updates and saves the date and time
with the selected time in NEW TIME.

New Time

Select one of the following server time.
• Synchronize with computer time: Obtains the time from the computer.
• Set manually: Sets the date and time manually.
• Synchronize with NTP Server: Obtains the time from the assigned NTP server at
every hour in INTERVAL. The NTP server's IP address or host name has to be speci-
fied in the time server.

Time Zone

Select the time zone to be referenced to the NTP server where the camera is installed
Mark AUTOMATICALLY ADJUST FOR DAYLIGHT SAVING CHANGES check box to update
the time automatically with daylight savings
18

Publicité

Table des Matières
loading

Table des Matières