Enerwatt EWB-QUAD48V-R Guide D'utilisation page 5

3. OPERATION GUIDE
3. INSTRUMENT INSTRUCTIONS
LCD Display
NOTES:
1. If you brake, the current indication points left, which means that the current is recharging the battery.
2. When the battery power capacity indicator has only one bar light left or the charge indicator signal
is displayed, charge the battery.
3. When you turn on the power lock the first time, the distance indicator will display the accumulated
distance and after that it will display the present riding range.
Turn left
Time indicator
Speed indicator
4. BRAKING INSTRUCTIONS
• EABS
Besides the mechanical brake lever, there is an electric assisted brake switch inside the brake lever.
The scooter may not work if the user presses the brake lever and it does not reset.
Simply loosen the brake and revert to original position.
• Parking Brake lock
When you need to park the scooter, there is a parking lock which
can be pressed to lock the brake lever so the wheel cannot move.
• Adjustment of Brake
Hold the brake lever at 2/3L length and the scooter is in brake position.
This is the correct position. If the brake becomes loose, turn the adjusting
nut clockwise, to tighten. The cable length from the nut should be
within 10mm.
5. ADJUSTMENT OF SEAT
Riders can pull the adjusting handle under the seat while
sitting on the scooter and move forward or backward
to find the best riding position. Then release the handle.
(CONTINUED)
Current indication
MODEL: EWB-QUAD48V-R
Turn right
Charge indicator
Distance indicator
Power capacity
Screw Nut Brake lever
Brake pad
Brake arm
Adjusting nut
Seat
Adjusting
handle
USER'S MANUAL
Brake
cable
5