Télécharger Imprimer la page

AUTO-HAK T47 Instructions De Montage page 2

Publicité

Les langues disponibles

Les langues disponibles

Towbar accessories:
After install the towbar you should get adequate note in registration book (at
authorised service station).The car should be equipped with:
Indicators
Tow mirrors
After 1000km of exploitation check all bolts and nuts. The ball of towbar must be
always kept clear and conserve with a grease.
NOTE
Towing hitch (without electrical set)
T47
Cat. no.
Class: A50-X
Designed for:
Manufacturer: KIA
Model: CERATO
produced since 2004 till 2008
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 1813
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
Max vehicle weight [kg]
+
Max vehicle weight [kg]
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 8,0 kg
maximum trailer weight: 1450 kg
maximum vertical cup load: 56 kg
Foreword
9,81
D [kN]
X
=
1000

Publicité

loading