Télécharger Imprimer la page

FLINQ FQC8145 Manuel Utilisateur page 3

Casque sans fil avec annulation active du bruit

Publicité

Les langues disponibles

Les langues disponibles

• In Bluetooth mode: 1x press = Previous song, long press = Volume down
3. ON/OFF button:
• When you receive a phone call in Bluetooth mode: 1x press = Answering
the call and ending the call. Long press = Reject the call. Quickly press 2x =
Last number redialing. To play/pause music = 1x press
4.Next song/Volume + button:
• In Bluetooth mode: 1x press = Next song, long press = Volume up
Note:
Restart music: When a call is answered the music will stop automatically. To start
the music again after the call press 1x the ON/OFF button.
LED indicator:
• In Bluetooth pairing mode: The blue/red LED light will flash quickly to
indicate it is ready to pair. The blue LED light will flash 2x slowly when the
headphone is successfully connected to your device.
Active Noise Cancelling (ANC) INSTRUCTIONS:
A. Make sure the power is ON or OFF
B. Long press the M button to Activate the ANC function ON (Green LED is ON)
or OFF (Green LED is OFF)
C. Note: The ANC function will lower the background noises in ambient but
annoying/noise full surroundings like inside an airplane or busy locations.
You can use it stand alone or with Music ON/OFF and also in AUX Line-In
mode.
AUX LINE-IN MODE INSTRUCTIONS:
Power ON the headphone and insert the supplied AUX Cable and it will turn
to AUX Line-In mode automatically. It will now play any audio from your
connected Non-Bluetooth device. If not done automatically please use the
mode button to select it.
If you use this mode then the control buttons do not work, you need to use
the controls from your source device.
It supports; smart(phone) devices, Ipad/Tablets/Ipod/MP4/MP3/CD/PC
and other line out devices and can be used also in Airplane mode.
HIGHLIGHT NOTES:

Publicité

loading