Chauvet Professional Colorado 2 Quad Zoom Manuel De Référence page 4

EN
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Menu Map
Main Level
STAT
AUTO
RUN
DMX
PERS
EDIT PR. 1-10
3
QUICK REFERENCE GUIDE
Programming Levels
R.
G.
B.
W.
Z.
S.
AT. 1-10
PR 1-10
DMX
SLAVE
D. 001-512
TR16
STD.Y
TOUR
AR2.Z
AR2.S
AR2.D
ARC.2
AR1.D
ARC.1
HSV.
R.
G.
B.
W.
SC.01-30
Z.
S.
T.
F.
Combines red, green, blue, and white
to make a custom color
0-255
(0–100%)
Changes the beam angle (zoom)
Selects the strobe
0-20
frequency (0–20 Hz)
Selects automatic programs and auto
program speed
Selects customizable programs
Receives DMX signals from the DMX
controller
Receives DMX signals from the master
Sets the DMX starting address
17-channel: 16-bit RGBW and dimmer;
strobe, color macro, auto/custom,
dimmer speed, auto speed, zoom,
zoom reset
17-channel: 16-bit RGBW and dimmer;
strobe, color macro, auto/custom,
dimmer speed, auto speed, zoom,
zoom reset
12-channel: RGBW, dimmer, strobe,
color macro, auto/custom, dimmer
speed, auto speed, zoom, zoom reset
7-channel: RGBW, dimmer, zoom,
zoom reset
6-channel: RGBW, dimmer, strobe
5-channel: RGBW, dimmer
4-channel: RGBW
4-channel: RGB, dimmer
3-channel: RGB control
3-channel: HSV control
Combines red, green, blue, and white
to make a custom color
0-255
(0-100%)
Changes the beam angle (zoom)
0-20 Selects the strobe frequency (0–20 Hz)
Defines the step duration (slow to fast)
0-255
Defines the fade duration (slow to fast)
Colorado 2 Quad Zoom QRG Rev. 2
Description