VOSKER V200 Guide De Démarrage Rapide page 9

START THE CAMERA

We strongly suggest to slow format your SD card in a compu-
ter, even more if it has been used in another electronic device.
Turn On the camera and let it do the network search as it can take a
few minutes. Once the network search is completed, you'll see the
signal strength appear. If you have no signal, move outside or get near
a window and restart the camera a few times if need be to get all the
information from the cell network.
Note that the signal bars on a V200 might not be equal to your other
cellular devices as there are no industry standard and practice to label
dBm values to a specific number of bars.
Start Camera
Detection Test
View
Settings
Click on Start Camera and select the desired operating mode (photo,
time lapse or video) in the Mode menu by pressing OK. If you start the
camera in Video mode, make sure that you have enabled the Photo
First setting.
When the mode is selected, the test light in front of the camera will
flash for 30 seconds to allow the user to leave the area without being
photographed or recorded.
The camera has now updated its status in the VOSKER app with its
latest information. The camera is now ready to take pictures and trans-
mit them to your VOSKER app upon the next synch. Synchs are set by
default to every 4 hours from midnight.
HOME
LTE
MODE
(Con guration)
Photo
Photo
(Con guration)
Time lapse
Time lapse
(Con guration)
Vidéo
Video
9