Publicité
Les langues disponibles
Les langues disponibles
Specifications
Distance between U-bolt and bicycle frame [cm] Approximately 10
Suitable for U-bolt diameter [mm]
Frame diameter of the bicycle [mm]
Weight
Safety notes
1.
Keep children away and do not permit children to use or play with
this device!
2.
Only use this product for the intended use!
3.
Do not manipulate or disassemble the device!
4.
For your own safety, only use accessories or replacement parts
specified in the instructions or that the manufacturer has
recommended!
Operating instructions
Open the lock with the key in the knob nut (the red point is located
opposite the lock symbol). Remove the key. Rotate the knob nut anti-
clockwise until the holding clamp for the bicycle frame has opened wide.
Press the holding clamp and the knob nut together, this releases the
folding section of the pipe clip. Hold the clamp and nut together. Open the
pipe clip and position it at a suitable location, for your bicycle, on the pipe
for the U-bolt. Close the pipe clip and release the holding clamp and knob
nut. Make sure that the lock is correctly seated.
Set the frame holder to a position that is suitable for your bicycle. Place
the holding clamp around the frame of your bicycle and rotate the knob
nut clockwise tightly so that the bicycle and frame holder are securely
attached at the U-bolt.
To prevent theft, lock the lock in the knob nut (the red point is on the lock
symbol).
Maintenance
Cleaning: Clean the frame holder with a dry and soft cloth only.
Maintenance: After long use in heavy rain, lubricate the lock with a light,
resin-free oil.
Storage: When not in use, store the frame holder in a dry place.
Notes for environmental protection
Please dispose of this device via the recycling facilities or public/
community collection points.
(11235, 11237)
Approximately 30
(11236, 11238)
Approximately 25
(11235, 11236)
Approximately 30(11237,
11238)
30 - 60
0.400 kg (11235, 11237)
0.500 kg (11236, 11238)
Publicité
