Publicité
Les langues disponibles
Les langues disponibles
VC734000MEE Rev2.qxp_Morphy Richards Instruction Book 17/12/2018 11:25 Page 11
NOTE: Using the product on MAX/TURBO setting will give
approximately 15 minutes of use. Using the product on the
MIN setting will give up to 60 minutes of use in the handheld
mode. After approximately 15 minutes of continuous use on
the MAX/TURBO setting, the power will automatically reduce
to the MIN setting to prevent over-discharge of the battery.
Using the extension tube for extended reach
and handstick mode
Assemble the product for handstick vacuum cleaning (see
'Assembly in handstick mode').
IMPORTANT: When using the motorised floor brush (23), never
keep it in one location on the floor for an extended period and do
not leave the product running whilst standing still. The rotating
brush bar could cause damage to some floor coverings if the floor
is exposed to the rotating brush action for a continued period of
time.
For extra reach whilst cleaning high areas like coving etc, use the
crevice tool (28), upholstery nozzle (27) or dusting brush (26) in
place of the motorised floor brush (23).
Handheld vacuum cleaning
1 2 This function is ideal for cleaning stairs, curtains and upholstery.
To separate the extension tube (16) from the handheld vacuum
cleaner (9), press the handheld vacuum cleaner attachments
release buttons (17) and pull the extension tube away from the
handheld vacuum cleaner.
1 3 To attach the motorised floor brush (23) to the handheld vacuum
cleaner (9), push the neck of the motorised floor brush into the
handheld vacuum cleaner suction inlet (18) until it clicks into
place.
To separate the motorised floor brush from the handheld vacuum
cleaner, press the handheld vacuum cleaner attachments release
buttons (17) and pull the motorised floor brush away from the
handheld vacuum cleaner.
1 4 To use the crevice tool (28) upholstery nozzle (27), or dusting
brush (26) in place of the motorised floor brush (23), align the
ridges on the side of the tool with the grooves inside the handheld
vacuum cleaner suction inlet (18) and push in place until a click is
heard. To remove it again, press the handheld vacuum cleaner
attachments release buttons (17).
NOTE: To use the dusting brush (26), it must be attached to the
upholstery nozzle (27) (see 'Using the attachments').
Using the attachments
Crevice tool and brushes
Crevice tool (28) for awkward places, corners and behind radiators
etc. This tool is also useful on stairs.
Dusting brush (26) for carpet, upholstery and stairs etc.
Upholstery nozzle (27) for upholstery and bedding etc.
The dusting brush (26) must be attached to the upholstery nozzle
(27 ). Slide the dusting brush on to the front of the upholstery
nozzle until it clicks into place, as shown.
9 1 0 1 1
1 5
1 6
Tool storage
When not in use, the attachments may be stored in the tool
storage (31) on the charging / storage mount (30) as shown
(below).
1.
Attach the dusting brush (26) to the upholstery nozzle (27) as
shown above.
2.
Slide the combined dusting brush and upholstery nozzle onto the
crevice tool (28).
3.
Push the base of the crevice tool into the tool storage.
Maintenance
The guarantee may be invalidated if the motor is damaged
due to: using the appliance without the filter(s) installed; not
cleaning the filter(s); or not replacing a damaged filter.
Your cleaner is manufactured to withstand normal day-to-day use,
but occasionally wipe over with a damp cloth to help maintain its
good looks. Take care not to get the electrical connections wet.
Abrasive cleaners should not be used.
Maintenance - emptying the dust canister and
1 7
cleaning the filters
Empty the dust canister (12) regularly even if it does not look full,
this will maintain the performance.
To ensure optimum suction and performance, we recommend that
the canister is only filled to the line shown on the side of the
canister.
We recommend cleaning the filter (13) every time the dust
canister (12) is emptied.
The dust canister can be quickly and easily emptied:
1.
Press the dust canister release button (11) and pull the dust
canister (12) away from the handheld vacuum cleaner (9).
Remove the main filter (13) and set aside. 1 8
2.
3.
Use the dust canister swing base release button (14) to open the
dust canister swing base (15). 1 9
4.
Empty the dirt from inside the dust canister and push the swing
base closed again.
Remove the foam filter (13a) from the main filter (13). 2 0
5.
6.
Dust off the foam filter each time the dust canister is emptied.
Every month, wash the foam filter in luke-warm water and
thoroughly air dry before re-fitting.
IMPORTANT: Do not wash the filter(s) with hot water or
detergents.
IMPORTANT: Do not use heated appliances to dry the filter(s).
7.
Replace the foam filter into the main filter.
8.
Replace the main filter into the top of the dust canister and
replace the dust canister into the handheld vacuum cleaner (9).
IMPORTANT: Never use the product without the main filter
(13) and the foam filter (13a) fitted.
g
11
Publicité
