CDVI V3E35R Mode D'emploi

PRODUCT PRESENTATION
38
NFS 61-937
Monitored
Flush mount
High corrosion resistance
Delivered with armature plate
No mechanical wear
No residual magnetism
Ease of installation
9
Recommended for interior use
Fail safe (Door unlocked when power off)
Holding force: 300 kg
Built-in varistor: Built-in electronic protection to
eliminate back EMF
Dimensions (L x W x D): 228 x 35.5 x 24.5 mm
Armature plate dimensions (L x W x D): 185 x 38 x 11 mm
Power supply: 12-24V dc
Consumption: 480 mA @ 12V dc
240 mA @ 24V dc
IP42 WEEE & RoHS
PACKAGE CONTENT
11
Magnetic Armature
lock plate
1 1 1 1
M5x25 M8x35
Screw Screw
4 4 1 1
ELECTRICAL CONNECTIONS
12V dc Default setup
Terminal
Correspondence
block
+ 12 or 24V dc
- 0V
N.C NC (Normally closed)
COM COM
N.O
NO (Normally open)
The NO/NC signal only switches when
the door is closed with the power to it on.
IMPORTANT NOTE
- Check the jumper position before connecting
the lock to the input current. A wrong position
could damage the lock. This type of damage
is not covered by the warranty.
- Make sure that the magnet and the armature
meet evenly over their entire mating surfaces.
The Armature plate must be able to pivot
slightly about its center mounting screw
to compensate for any door misalignment.
CDVI FRANCE + EXPORT CDVI UK
31, av. du Général Leclerc [UNITED KINGDOM - IRE-
93500 PANTIN - France LAND]
Phone +33 (0)1 48 91 01 02 Phone +44 (0)1628 531300
www.cdvi.com www.cdvi.co.uk
CDVI SWEDEN CDVI AMERICAS
[SWEDEN - DENMARK - [CANADA - USA]
NORWAY FINLAND] Phone +1 (450) 682 7945
Phone +46 (0)31 760 19 30 www.cdvi.ca
www.cdvi.se
Manufacturing Access Control since 1985
V3E35R
300kg Internal Mortice Electromagnetic lock
3
20,5
10
YEAR
WARRANTY
CE Certification
5x16 Rubber
Steel washer
Roll pin washer
2 2 2 2
M8x25 Joggle
Cap nut
Screw bracket
1 1 1 1
Voltage selection jumpers
12V dc
Recommended power supplies
Voltage Voltage
12V dc
24V dc 24V dc
CDVI BENELUX
[BELGIUM - NETHERLAND -
LUXEMBOURG]
Phone +32 (0) 56 73 93 00
www.cdvibenelux.com
CDVI SUISSE
Phone +41 (0)21 882 18 41
www.cdvi.ch
35,5
Maglock Maglock
M5 Screw M5 Screw
Armature plate Armature plate
Roll pin Roll pin
Rubber washer Rubber washer
Steel washer Steel washer
Cap nut Cap nut
M5X8
Srew
Ce document est la propritété exclusive de CDVI, il ne peut être communiqué à des tiers sans son autorisation.
1 1 4 4
This document is the exclusive property of CDVI and it may not be disclosed to others without permission.
F0525000012-A
C.A. :
Manual
Mortice electromagnetic lock - 300kg
2 2 1 1 Material :
DES: W.Sainvil
24V dc
ADC335 ADC612S
ADC324 ADC624S
CDVI IBÉRICA
[SPAIN - PORTUGAL]
Phone +34 (0)935 390 966
www.cdviberica.com
CDVI ITALIA
Phone +39 0321 90 573
Fax: +39 0321 90 8018
www.cdvi.it
SCALE 1:2
MOUNTING RECOMMENDATIONS
V3E35R
Armature plate
- It is vital that the magnetic lock and armature
General tolerance: 0.2 Surface condition: Ra 3,2
plate are securely fixed to their supports.
3
Vol. (mm ) : Weight (g) :
- The magnetic lock and the armature plate must
be aligned.
- The armature plate must be mounted "floating"
around the central mounting screw to
compensate for any misalignment of the door
OPTIONAL ACCESSORIES
References
Description Description For armature plate For armature plate
CDVI TAIWAN
Phone +886 (0)42471 2188
www.cdvichina.cn
CDVI CHINA
Phone +86 10 84606132/82
www.cdvichina.cn
CDVI MAROC
Phone +212 5 2248 0940
www.cdvi.ma
EN
Joggle bracket Joggle bracket
M5 Screw M5 Screw
M8 Screw M8 Screw
Plan M2
Edition
SCALE 1:1.5
Date 16
A3H Project :
AMB300
CDVI POLSKA
Phone +48 12 659 23 44
www.cdvi.com.pl
CDVI GERMANY
+49 (0) 175 2932 901
www.cdvi.de
www.cdvi.com