Front And Right Side; Back - Insignia NS-PDP50HD-09 Guide De L'utilisateur

Insignia NS-PDP50HD-09 50" PDP TV

Front and right side

# Item Description
1 VOL +/VOL - Press to increase or decrease the volume.
2 Press to change to a higher or lower
/
CH CH
channel.
3 MENU button Press to open the on-screen menu.
4 INPUT button Press to select the AV signal input. You can
select:
• TV (CABLE/AIR)
• VIDEO1 (REAR)
• S-VIDEO1 (REAR)
• VIDEO2 (SIDE))
• S-VIDEO2 (SIDE)
• YPbPr1
• YPbPr2
• HDMI1 (REAR)
• HDMI2 (REAR)
• HDMI3 (SIDE)
• PC (VGA).
5 Press to turn your TV on or off.
(power)
button
6 Power/Standby Lights when your TV is plugged into a
indicator power outlet. When your TV is on, the
indicator is blue. When your TV is in
standby mode, the indicator is red.
7 IR sensor Receives signals from the remote control.
Do not block.

Back

# Description
1 HDMI 1 IN
2 HDMI 2 IN
3 PC IN VGA
4 PC IN AUDIO L/R
5 S-VIDEO1 IN (S-Video
and L/R audio)
6 VIDEO1 IN (composite
video and L/R audio)
7 YPbPr1 IN, AUDIO L,
and AUDIO R
8 YPbPr2 IN, AUDIO L,
and AUDIO R
9 HDMI audio in
www.insignia-products.com
HDMI 2 IN
OUTPUT
HDMI 3 IN VIDEO DIGITAL-AUDIO
L R
PC IN
VGA L R L R
AV2 IN Y/C L R AV4 IN Y Pb Pr L R
AV3 IN VIDEO L R AV5 IN Y Pb Pr L R
Function
Connect an HDMI cable to this
connector. Supports HD video
and digital audio. Does not
support 480i. Accepts DVI video
using an adapter or HDMI-to-DVI
cable (not included).
Connect an HDMI cable to this
connector. Supports HD video
and digital audio. Does not
support 480i. Accepts DVI video
using an adapter or HDMI-to-DVI
cable (not included).
Connect a VGA (D-sub) cable
from your PC to this connector
(analog PC).
Connect left (white) and right
(red) audio cables to the L and R
jacks.
Connect an S-Video cable and
connect left (white) and right
(red) audio cables to the L and R
jacks.
Connect a video cable (analog
composite video - 480i) to this
jack (yellow).
Connect left (white) and right
(red) audio cables to the L and R
jacks.
Connect component video cables
to the Y, Pb, and Pr jacks and
audio left (white) and right (red)
cables to the L and R jacks.
Connect component video cables
to the Y, Pb, and Pr jacks and
audio left (white) and right (red)
cables to the L and R jacks.
Connect left (white) and right
(red) audio cables to the L and R
jacks.
7