Nokia LPS-4 Mode D'emploi page 6

lps-4_en3.fm Page 6 Thursday, June 8, 2006 9:31 AM
T e c h n i c a l d a t a
3. Technical data
External audio output:
• Connector: 3.5-mm socket
• Can be connected to the audio input of a compatible hearing aid
or to a compatible speech processor of a cochlear implant
• Impedance: >1 kΩ @ 1 kHz (nominal 2.2 kΩ @1 kHz)
• Typical output signal level: 0.5–10 mV rms
• Symbol:
The loopset can be connected to a compatible speech processor with a
suitable cable that has a 3.5-mm stereo or mono plug. The sound that
you hear through the loopset is monophonic.
External audio input:
• This feature is not available.
• Symbol:
6