Smok FETCH KIT Mode D'emploi page 5

How to use this product:
1. Power On:
While the device is off, fast press Fire Key 5 times in 2s to turn it on. The screen
successively displays "FETCH" and version information;
2. Vaping:
While the device is on, press Fire Key to vape (it will be forced to stop working when
vaping is longer than 8s one time, release and press again to vape again);
Quickly press the Fire Key 3 times to lock or unlock the vaping function.
3. Screen Unlocked Status:
1) Press UP or DOWN Button to choose your desired wattage;
2) Press UP and DOWN Button simultaneously to lock or unlock the wattage adjustment
function;
3) Press Fire key and DOWN Button simultaneously to clear puff number;
4) Press Fire key and UP Button simultaneously to choose a theme color.
4. Power Off: While the device is on, fast press Fire Key 5 times in 2s to turn it off.
-Before Vaping
- Fill the pod completely with e-liquid.
- Take 2-3 puffs while the power is off and without pressing the Fire Key.
- Begin vaping.
- If e-liquid is sucked through the SMOK product into the mouth, immediately wash
your mouth out completely, seek
atomizer and clean the spillage before vaping again.
Instruc�ons on how to fill this product with e-liquid
• Before the e-liquid in a SMOK product runs out, add e-liquid into the pod. This should
be done before the e-liquid runs out to avoid burning the coil.
• For instruc�ons on refilling the SMOK product with e-liquid, users should refer to
these instruc�ons below, and the instruc�ons for bo�les containing e-liquid.
• Users should first ensure that the nozzle a�ached to an e-liquid bo�le can easily
connect – and slot into – the SMOK pod. The nozzle a�ached to an e-liquid bo�le
must be smaller in diameter than the opening (filling slot) in the SMOK pod. The
opening (filling slot) of the SMOK product is below. The nozzle of an e-liquid bo�le
must be smaller than the diameter measurements below.
English / 04
medical assistance if needed, then remove the